dmesg - GCC 5.4.0
Linux version 4.8.0-999-generic (kernel@gomeisa) (gcc version 6.2.0 20160901 (Ubuntu 6.2.0-3ubuntu11) ) #201609082202 SMP Fri Sep 9 02:04:16 UTC 2016
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x0000000038d69fff] usable
BIOS-e820: [mem 0x0000000038d6a000-0x0000000039ac7fff] reserved
BIOS-e820: [mem 0x0000000039ac8000-0x0000000039d9afff] usable
BIOS-e820: [mem 0x0000000039d9b000-0x000000003a937fff] ACPI NVS
BIOS-e820: [mem 0x000000003a938000-0x000000003b159fff] reserved
BIOS-e820: [mem 0x000000003b15a000-0x000000003b1befff] type 20
BIOS-e820: [mem 0x000000003b1bf000-0x000000003b1bffff] usable
BIOS-e820: [mem 0x000000003b1c0000-0x000000003b245fff] reserved
BIOS-e820: [mem 0x000000003b246000-0x000000003bffffff] usable
BIOS-e820: [mem 0x000000003c000000-0x000000003dffffff] reserved
BIOS-e820: [mem 0x0000000040000000-0x000000004fffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000004bfffffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.40 by American Megatrends
efi: ESRT=0x3b156218 ACPI=0x3a5a3000 ACPI 2.0=0x3a5a3000 SMBIOS=0xf05e0 SMBIOS 3.0=0x3b01e000 MPS=0xfca10
esrt: Reserving ESRT space from 0x000000003b156218 to 0x000000003b156250.
SMBIOS 3.0.0 present.
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x4c0000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000080000000 mask 3FFF80000000 uncachable
1 base 000040000000 mask 3FFFC0000000 uncachable
2 base 380000000000 mask 3FC000000000 uncachable
3 base 00003F000000 mask 3FFFFF000000 uncachable
4 base 0000E0000000 mask 3FFFF0000000 write-through
5 base 0000F0000000 mask 3FFFFE000000 write-through
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0x3c000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fccd0-0x000fccdf] mapped at [ffff9c75800fccd0]
Base memory trampoline at [ffff9c7580097000] 97000 size 24576
Using GB pages for direct mapping
BRK [0x44a802000, 0x44a802fff] PGTABLE
BRK [0x44a803000, 0x44a803fff] PGTABLE
BRK [0x44a804000, 0x44a804fff] PGTABLE
BRK [0x44a805000, 0x44a805fff] PGTABLE
BRK [0x44a806000, 0x44a806fff] PGTABLE
BRK [0x44a807000, 0x44a807fff] PGTABLE
BRK [0x44a808000, 0x44a808fff] PGTABLE
BRK [0x44a809000, 0x44a809fff] PGTABLE
BRK [0x44a80a000, 0x44a80afff] PGTABLE
RAMDISK: [mem 0x31561000-0x336c6fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000003A5A3000 000024 (v02 ALASKA)
ACPI: XSDT 0x000000003A5A3098 0000AC (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000003A5D6EC0 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x000000003A5A31D8 033CE5 (v02 ALASKA A M I 01072009 INTL 20091013)
ACPI: FACS 0x000000003A936F80 000040
ACPI: APIC 0x000000003A5D6FD0 0000C8 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x000000003A5D7098 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x000000003A5D70E0 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x000000003A5D7180 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: SSDT 0x000000003A5D71C0 00036D (v01 SataRe SataTabl 00001000 INTL 20120913)
ACPI: UEFI 0x000000003A5D7530 000042 (v01 ALASKA A M I 01072009 00000000)
ACPI: HPET 0x000000003A5D7578 000038 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: MSCT 0x000000003A5D75B0 000090 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: SLIT 0x000000003A5D7640 00002D (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: SRAT 0x000000003A5D7670 001158 (v03 ALASKA A M I 00000001 INTL 20091013)
ACPI: WDDT 0x000000003A5D87C8 000040 (v01 ALASKA A M I 00000000 INTL 20091013)
ACPI: SSDT 0x000000003A5D8808 014F6F (v02 ALASKA PmMgt 00000001 INTL 20120913)
ACPI: NITR 0x000000003A5ED778 000071 (v02 ALASKA A M I 00000001 INTL 20091013)
ACPI: BGRT 0x000000003A5ED7F0 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: DMAR 0x000000003A5ED828 0000D4 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: ASF! 0x000000003A5ED900 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x06 -> Node 0
SRAT: PXM 0 -> APIC 0x08 -> Node 0
SRAT: PXM 0 -> APIC 0x0a -> Node 0
SRAT: PXM 0 -> APIC 0x0c -> Node 0
SRAT: PXM 0 -> APIC 0x0e -> Node 0
ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x3fffffff]
ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x4bfffffff]
NUMA: Initialized distance table, cnt=1
NUMA: Node 0 [mem 0x00000000-0x3fffffff] + [mem 0x100000000-0x4bfffffff] -> [mem 0x00000000-0x4bfffffff]
NODE_DATA(0) allocated [mem 0x4bfffa000-0x4bfffefff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x00000004bfffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x0000000038d69fff]
node 0: [mem 0x0000000039ac8000-0x0000000039d9afff]
node 0: [mem 0x000000003b1bf000-0x000000003b1bffff]
node 0: [mem 0x000000003b246000-0x000000003bffffff]
node 0: [mem 0x0000000100000000-0x00000004bfffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x00000004bfffffff]
On node 0 totalpages: 4169111
DMA zone: 64 pages used for memmap
DMA zone: 26 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 3640 pages used for memmap
DMA32 zone: 232952 pages, LIFO batch:31
Normal zone: 61440 pages used for memmap
Normal zone: 3932160 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x38d6a000-0x39ac7fff]
PM: Registered nosave memory: [mem 0x39d9b000-0x3a937fff]
PM: Registered nosave memory: [mem 0x3a938000-0x3b159fff]
PM: Registered nosave memory: [mem 0x3b15a000-0x3b1befff]
PM: Registered nosave memory: [mem 0x3b1c0000-0x3b245fff]
PM: Registered nosave memory: [mem 0x3c000000-0x3dffffff]
PM: Registered nosave memory: [mem 0x3e000000-0x3fffffff]
PM: Registered nosave memory: [mem 0x40000000-0x4fffffff]
PM: Registered nosave memory: [mem 0x50000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed44fff]
PM: Registered nosave memory: [mem 0xfed45000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x50000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 35 pages/cpu @ffff9c7a3fc00000 s102808 r8192 d32360 u262144
pcpu-alloc: s102808 r8192 d32360 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4103941
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16198500K/16676444K available (6279K kernel code, 1359K rwdata, 2880K rodata, 1528K init, 1180K bss, 477944K reserved, 0K cma-reserved)
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:524544 nr_irqs:896 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1700.124 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3400.24 BogoMIPS (lpj=6800496)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160422
ACPI: 3 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 22 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
numa_add_cpu cpu 0 node 0: mask now 0
Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 24K (ffffffff9aad3000 - ffffffff9aad9000)
ftrace: allocating 25473 entries in 100 pages
smpboot: APIC(0) Converting physical 0 to logical package 0
smpboot: Max logical packages: 1
DMAR: Host address width 46
DMAR: DRHD base: 0x000000fbffd000 flags: 0x0
DMAR: dmar0: reg_base_addr fbffd000 ver 1:0 cap 8d2008c10ef0466 ecap f0205b
DMAR: DRHD base: 0x000000fbffc000 flags: 0x1
DMAR: dmar1: reg_base_addr fbffc000 ver 1:0 cap 8d2078c106f0466 ecap f020df
DMAR: RMRR base: 0x0000003b030000 end: 0x0000003b03ffff
DMAR: ATSR flags: 0x0
DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0
DMAR-IR: IOAPIC id 1 under DRHD base 0xfbffc000 IOMMU 1
DMAR-IR: IOAPIC id 2 under DRHD base 0xfbffc000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfbffc000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2609 v4 @ 1.70GHz (family: 0x6, model: 0x4f, stepping: 0x1)
Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1
numa_add_cpu cpu 1 node 0: mask now 0-1
#2
numa_add_cpu cpu 2 node 0: mask now 0-2
#3
numa_add_cpu cpu 3 node 0: mask now 0-3
#4
numa_add_cpu cpu 4 node 0: mask now 0-4
#5
numa_add_cpu cpu 5 node 0: mask now 0-5
#6
numa_add_cpu cpu 6 node 0: mask now 0-6
#7
numa_add_cpu cpu 7 node 0: mask now 0-7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (27209.42 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x39d9b000-0x3a937fff] (12177408 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x40000000-0x4fffffff] (base 0x40000000)
PCI: MMCONFIG at [mem 0x40000000-0x4fffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:03: _OSC: platform does not support [PME AER]
acpi PNP0A03:03: _OSC: OS now controls [PCIeHotplug PCIeCapability]
acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000
pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100
pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100
pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000
pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000
pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000
pci 0000:ff:0c.4: [8086:6fe4] type 00 class 0x088000
pci 0000:ff:0c.5: [8086:6fe5] type 00 class 0x088000
pci 0000:ff:0c.6: [8086:6fe6] type 00 class 0x088000
pci 0000:ff:0c.7: [8086:6fe7] type 00 class 0x088000
pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:6ff9] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000
pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000
pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100
pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000
pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100
pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000
pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000
pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100
pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000
pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000
pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000
pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000
pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000
pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000
pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000
pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000
pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000
pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000
pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000
pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000
pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000
pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000
pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000
pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000
pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000
pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000
pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000
pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000
pci 0000:ff:16.0: [8086:6f68] type 00 class 0x088000
pci 0000:ff:16.6: [8086:6f6e] type 00 class 0x088000
pci 0000:ff:16.7: [8086:6f6f] type 00 class 0x088000
pci 0000:ff:17.0: [8086:6fd0] type 00 class 0x088000
pci 0000:ff:17.4: [8086:6fb8] type 00 class 0x088000
pci 0000:ff:17.5: [8086:6fb9] type 00 class 0x088000
pci 0000:ff:17.6: [8086:6fba] type 00 class 0x088000
pci 0000:ff:17.7: [8086:6fbb] type 00 class 0x088000
pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000
pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000
pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000
pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000
pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000
pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000
pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PME AER]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x1000-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x50000000-0xfbffbfff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000
pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000
pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000
pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:6f2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xfb43d000-0xfb43dfff]
pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000
pci 0000:00:14.0: [8086:8d31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xfb420000-0xfb42ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfb43c000-0xfb43c00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:15a0] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xfb400000-0xfb41ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xfb439000-0xfb439fff]
pci 0000:00:19.0: reg 0x18: [io 0xf020-0xf03f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfb438000-0xfb4383ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:8d20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfb430000-0xfb433fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:8d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.7: [8086:8d1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfb437000-0xfb4373ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8d47] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfb436000-0xfb4367ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfb435000-0xfb4350ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0580-0x059f]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:03:00.0: [10de:17c2] type 00 class 0x030000
pci 0000:03:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:03:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:03:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:03:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:03:00.0: reg 0x30: [mem 0xfb000000-0xfb07ffff pref]
pci 0000:03:00.1: [10de:0fb0] type 00 class 0x040300
pci 0000:03:00.1: reg 0x10: [mem 0xfb080000-0xfb083fff]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:03.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:05:00.0: [8086:1533] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [mem 0xfb200000-0xfb2fffff]
pci 0000:05:00.0: reg 0x18: [io 0xd000-0xd01f]
pci 0000:05:00.0: reg 0x1c: [mem 0xfb300000-0xfb303fff]
pci 0000:05:00.0: reg 0x30: [mem 0xfb100000-0xfb1fffff pref]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: PCI bridge to [bus 05]
pci 0000:00:1c.7: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.7: bridge window [mem 0xfb100000-0xfb3fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: Enabled 1 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:03:00.0
vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:03:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x38d6a000-0x3bffffff]
e820: reserve RAM buffer [mem 0x39d9b000-0x3bffffff]
e820: reserve RAM buffer [mem 0x3b1c0000-0x3bffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0454-0x0457] has been reserved
system 00:00: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x0500-0x057f] has been reserved
system 00:02: [io 0x0400-0x047f] could not be reserved
system 00:02: [io 0x0580-0x059f] has been reserved
system 00:02: [io 0x0600-0x061f] has been reserved
system 00:02: [io 0x0880-0x0883] has been reserved
system 00:02: [io 0x0800-0x081f] has been reserved
system 00:02: [mem 0xfed1c000-0xfed3ffff] has been reserved
system 00:02: [mem 0xfed45000-0xfed8bfff] has been reserved
system 00:02: [mem 0xff000000-0xffffffff] has been reserved
system 00:02: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:02: [mem 0xfed12000-0xfed1200f] has been reserved
system 00:02: [mem 0xfed12010-0xfed1201f] has been reserved
system 00:02: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x0a00-0x0a0f] has been reserved
system 00:03: [io 0x0a10-0x0a1f] has been reserved
system 00:03: [io 0x0a20-0x0a2f] has been reserved
system 00:03: [io 0x0a30-0x0a3f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 4 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:03.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:00:1c.7: PCI bridge to [bus 05]
pci 0000:00:1c.7: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.7: bridge window [mem 0xfb100000-0xfb3fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x1000-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x50000000-0xfbffbfff window]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:03: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:05: resource 1 [mem 0xfb100000-0xfb3fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:03:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS mismatch (64 != 32), using 64 bytes
Unpacking initramfs...
Freeing initrd memory: 34200K (ffff9c75b1561000 - ffff9c75b36c7000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x2d561000-0x31561000] (64MB) mapped at [ffff9c75ad561000-ffff9c75b1560fff]
Intel CQM monitoring enabled
Intel MBM enabled
pmd_set_huge: Cannot satisfy [mem 0xf1000000-0xf1200000] with a huge-page mapping due to MTRR override.
simple-framebuffer simple-framebuffer.0: framebuffer at 0xf1000000, 0x300000 bytes, mapped to 0xffffb725c1c00000
simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=1024x768x32, linelength=4096
Console: switching to colour frame buffer device 128x48
simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
futex hash table entries: 2048 (order: 5, 131072 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1473469662.020:1): initialized
Initialise system trusted keyrings
workingset: timestamp_bits=40 max_order=22 bucket_order=0
zbud: loaded
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x2120
intel_idle: v0.4.1 model 0x4F
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
microcode: sig=0x406f1, pf=0x1, revision=0xb00001d
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
alg: No test for pkcs1pad(rsa,sha512) (pkcs1pad(rsa-generic,sha512))
Loaded X.509 cert 'Build time autogenerated kernel key: 64649a7e397883bef7e4e6ca575d6419326a1c1d'
zswap: loaded using pool lzo/zbud
AppArmor: AppArmor sha1 policy hashing enabled
rtc_cmos 00:01: setting system clock to 2016-09-10 01:07:43 UTC (1473469663)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1528K (ffffffff9a955000 - ffffffff9aad3000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1896K (ffff9c79c9e26000 - ffff9c79ca000000)
Freeing unused kernel memory: 1216K (ffff9c79ca2d0000 - ffff9c79ca400000)
x86/mm: Checked W+X mappings: passed, no W+X pages found.
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
wmi: Mapper loaded
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
dca service started, version 1.12.1
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
ehci-pci: EHCI PCI platform driver
SCSI subsystem initialized
libata version 3.00 loaded.
[drm] Initialized drm 1.1.0 20060810
pps pps0: new PPS source ptp0
igb 0000:05:00.0: added PHC on eth0
igb 0000:05:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:05:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 4c:cc:6a:4e:d2:c2
igb 0000:05:00.0: eth0: PBA No: 000300-000
igb 0000:05:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
MXM: GUID detected in BIOS
checking generic (f1000000 300000) vs hw (e0000000 10000000)
checking generic (f1000000 300000) vs hw (f0000000 2000000)
fb: switching to nouveaufb from simple
Console: switching to colour dummy device 80x25
nouveau 0000:03:00.0: NVIDIA GM200 (120020a1)
igb 0000:05:00.0 enp5s0: renamed from eth0
e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
nouveau 0000:03:00.0: bios: version 84.00.1f.00.01
nouveau 0000:03:00.0: disp: dcb 10 type 8 unknown
nouveau 0000:03:00.0: Direct firmware load for nvidia/gm200/gr/sw_nonctx.bin failed with error -2
nouveau 0000:03:00.0: gr: failed to load gr/sw_nonctx
nouveau 0000:03:00.0: gr ctor failed, -2
nouveau: probe of 0000:03:00.0 failed with error -2
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 4c:cc:6a:4e:d2:c3
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
e1000e 0000:00:19.0 eno1: renamed from eth0
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb438000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.8.0-999-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb437000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.8.0-999-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.8.0-999-generic xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 15 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.8.0-999-generic xhci-hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xfb436000 port 0xfb436100 irq 34
ata2: SATA max UDMA/133 abar m2048@0xfb436000 port 0xfb436180 irq 34
ata3: SATA max UDMA/133 abar m2048@0xfb436000 port 0xfb436200 irq 34
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 3-10: new high-speed USB device number 2 using xhci_hcd
tsc: Refined TSC clocksource calibration: 1699.998 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x188125786ea, max_idle_ns: 440795276273 ns
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT1.SPT1._GTF] (Node ffff9c7a2f167118), AE_NOT_FOUND (20160422/psparse-542)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT1.SPT0._GTF] (Node ffff9c7a2f167ac8), AE_NOT_FOUND (20160422/psparse-542)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT1.SPT2._GTF] (Node ffff9c7a2f167410), AE_NOT_FOUND (20160422/psparse-542)
ata2.00: ATA-9: TOSHIBA-TR150, SAFZ12.3, max UDMA/133
ata2.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: ATA-9: TOSHIBA-TR150, SAFZ12.3, max UDMA/133
ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ATA-9: TOSHIBA-TR150, SAFZ12.3, max UDMA/133
ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT1.SPT1._GTF] (Node ffff9c7a2f167118), AE_NOT_FOUND (20160422/psparse-542)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT1.SPT2._GTF] (Node ffff9c7a2f167410), AE_NOT_FOUND (20160422/psparse-542)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT1.SPT0._GTF] (Node ffff9c7a2f167ac8), AE_NOT_FOUND (20160422/psparse-542)
ata2.00: configured for UDMA/133
ata3.00: configured for UDMA/133
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA TOSHIBA-TR150 12.3 PQ: 0 ANSI: 5
scsi 1:0:0:0: Direct-Access ATA TOSHIBA-TR150 12.3 PQ: 0 ANSI: 5
scsi 2:0:0:0: Direct-Access ATA TOSHIBA-TR150 12.3 PQ: 0 ANSI: 5
usb 1-1: New USB device found, idVendor=8087, idProduct=800a
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 3-10: New USB device found, idVendor=174c, idProduct=2074
usb 3-10: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 3-10: Product: AS2107
usb 3-10: Manufacturer: ASMedia
usb 3-10: SerialNumber: USB2.0 Hub
hub 3-10:1.0: USB hub found
hub 3-10:1.0: 4 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=8002
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 1:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 2:0:0:0: [sdc] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdc] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdc] Attached SCSI disk
sd 1:0:0:0: [sdb] Attached SCSI disk
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
random: fast init done
usb 4-4: new SuperSpeed USB device number 2 using xhci_hcd
usb 4-4: New USB device found, idVendor=174c, idProduct=3074
usb 4-4: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 4-4: Product: AS2107
usb 4-4: Manufacturer: ASMedia
usb 4-4: SerialNumber: USB2.0 Hub
hub 4-4:1.0: USB hub found
hub 4-4:1.0: 4 ports detected
usb 3-13: new high-speed USB device number 3 using xhci_hcd
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
usb 3-13: New USB device found, idVendor=1a40, idProduct=0101
usb 3-13: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-13: Product: USB 2.0 Hub
hub 3-13:1.0: USB hub found
hub 3-13:1.0: 4 ports detected
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
usb 3-14: new full-speed USB device number 4 using xhci_hcd
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on udev Kernel Socket.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport0: PC-style at 0x378 (0x778)
usb 3-14: New USB device found, idVendor=0403, idProduct=6001
usb 3-14: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-14: Product: FT232R USB UART
usb 3-14: Manufacturer: FTDI
usb 3-14: SerialNumber: A800fq8V
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
systemd-journald[1610]: Received request to flush runtime journal from PID 1
[PCSPP,TRISTATE,EPP]
parport0: irq 0 detected
usb 3-13.3: new low-speed USB device number 5 using xhci_hcd
lp0: using parport0 (polling).
usb 3-13.3: New USB device found, idVendor=04f2, idProduct=0833
usb 3-13.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-13.3: Product: USB Keyboard
usb 3-13.3: Manufacturer: CHICONY
clocksource: Switched to clocksource tsc
usb 3-13.4: new full-speed USB device number 6 using xhci_hcd
random: crng init done
usb 3-13.4: New USB device found, idVendor=1532, idProduct=0007
usb 3-13.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-13.4: Product: DeathAdder
usb 3-13.4: Manufacturer: Razer
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: Attached scsi generic sg2 type 0
EFI Variables Facility v0.08 2004-May-17
RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
pstore: using zlib compression
pstore: Registered efi as persistent store backend
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
Adding 16675836k swap on /dev/sda3. Priority:-1 extents:1 across:16675836k SSFS
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:03:00.1: Disabling MSI
snd_hda_intel 0000:03:00.1: Handle vga_switcheroo audio client
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
usbcore: registered new interface driver ftdi_sio
ftdi_sio 3-14:1.0: FTDI USB Serial Device converter detected
usb 3-14: Detected FT232RL
usb 3-14: FTDI USB Serial Device converter now attached to ttyUSB0
snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready 0x00000000
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13.3/3-13.3:1.0/0003:04F2:0833.0001/input/input13
hid-generic 0003:04F2:0833.0001: input,hidraw0: USB HID v1.11 Keyboard [CHICONY USB Keyboard] on usb-0000:00:14.0-13.3/input0
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13.3/3-13.3:1.1/0003:04F2:0833.0002/input/input14
audit: type=1400 audit(1473469666.258:2): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ippusbxd" pid=3749 comm="apparmor_parser"
audit: type=1400 audit(1473469666.258:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cups-browsed" pid=3747 comm="apparmor_parser"
audit: type=1400 audit(1473469666.258:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=3741 comm="apparmor_parser"
audit: type=1400 audit(1473469666.258:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=3741 comm="apparmor_parser"
audit: type=1400 audit(1473469666.258:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=3741 comm="apparmor_parser"
audit: type=1400 audit(1473469666.258:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=3741 comm="apparmor_parser"
audit: type=1400 audit(1473469666.258:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session" pid=3740 comm="apparmor_parser"
audit: type=1400 audit(1473469666.258:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=3740 comm="apparmor_parser"
audit: type=1400 audit(1473469666.262:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=3748 comm="apparmor_parser"
EDAC MC: Ver: 3.0.0
EDAC sbridge: Seeking for: PCI ID 8086:6fa0
EDAC sbridge: Seeking for: PCI ID 8086:6fa0
EDAC sbridge: Seeking for: PCI ID 8086:6ffc
EDAC sbridge: Seeking for: PCI ID 8086:6ffc
EDAC sbridge: Seeking for: PCI ID 8086:6ffd
EDAC sbridge: Seeking for: PCI ID 8086:6ffd
EDAC sbridge: Seeking for: PCI ID 8086:6f60
EDAC sbridge: Seeking for: PCI ID 8086:6fa8
EDAC sbridge: Seeking for: PCI ID 8086:6fa8
EDAC sbridge: Seeking for: PCI ID 8086:6f71
EDAC sbridge: Seeking for: PCI ID 8086:6f71
EDAC sbridge: Seeking for: PCI ID 8086:6faa
EDAC sbridge: Seeking for: PCI ID 8086:6faa
EDAC sbridge: Seeking for: PCI ID 8086:6fab
EDAC sbridge: Seeking for: PCI ID 8086:6fab
EDAC sbridge: Seeking for: PCI ID 8086:6fac
EDAC sbridge: Seeking for: PCI ID 8086:6fac
EDAC sbridge: Seeking for: PCI ID 8086:6fad
EDAC sbridge: Seeking for: PCI ID 8086:6fad
EDAC sbridge: Seeking for: PCI ID 8086:6faf
EDAC sbridge: Seeking for: PCI ID 8086:6faf
EDAC sbridge: Seeking for: PCI ID 8086:6f68
EDAC sbridge: Seeking for: PCI ID 8086:6f68
EDAC sbridge: Seeking for: PCI ID 8086:6f79
EDAC sbridge: Seeking for: PCI ID 8086:6f6a
EDAC sbridge: Seeking for: PCI ID 8086:6f6b
EDAC sbridge: Seeking for: PCI ID 8086:6f6c
EDAC sbridge: Seeking for: PCI ID 8086:6f6d
EDAC sbridge: ECC is disabled. Aborting
EDAC sbridge: Couldn't find mci handler
EDAC sbridge: Failed to register device with error -19.
intel_rapl: Found RAPL domain package
hid-generic 0003:04F2:0833.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [CHICONY USB Keyboard] on usb-0000:00:14.0-13.3/input1
input: Razer DeathAdder as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13.4/3-13.4:1.0/0003:1532:0007.0003/input/input15
hid-generic 0003:1532:0007.0003: input,hidraw2: USB HID v1.11 Mouse [Razer DeathAdder] on usb-0000:00:14.0-13.4/input0
IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input16
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input17
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input18
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input19
fuse init (API version 7.25)
igb 0000:05:00.0 enp5s0: igb: enp5s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready
perf: interrupt took too long (2504 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
perf: interrupt took too long (3132 > 3130), lowering kernel.perf_event_max_sample_rate to 63750
perf: interrupt took too long (3918 > 3915), lowering kernel.perf_event_max_sample_rate to 51000
show_signal_msg: 36 callbacks suppressed
conftest[16494]: segfault at 0 ip 0000000000400670 sp 00007ffdba8b8660 error 4 in conftest[400000+1000]
conftest[16523]: segfault at 0 ip 00007f352088eb5a sp 00007fff3fd13f28 error 4 in libc-2.23.so[7f35207f0000+1c0000]